Low-density polyethylene
LDPE LF511 Lotte
Low-density polyethylene · Lotte
LDPE LF511 Lotte is an LDPE made in Korea by HD Hyundai Chemical (a Lotte Chemical – HD Hyundai Oilbank joint venture) using the high-pressure tubular process, and marketed by Lotte Chemical. MFR 3.0 g/10 min, density 0.922, good heat sealing, low fish-eyes, clear (haze below 8%) and slippery (friction below 0.2) film. Imported and distributed by My Thinh Plastics, with the TDS and COA of each lot. Also searched as: LDPE LF-511, LF-511 Lotte.
01 / SPECIFICATIONS
LDPE LF511 Lotte data
| Property | Typical value |
|---|---|
| MFR (190 °C/2.16 kg) | 3.0 g/10 min |
| Density | 0.922 g/cm³ |
| Tensile strength at yield | ≈ 10 MPa |
| Haze | < 8 % |
| Dart drop impact (F50) | 110 g |
| Film coefficient of friction | < 0.2 |
| Production process | High-pressure tubular |
| Processing method | Blown film, foam |
Per the Lotte Chemical LF511 TDS (Hyundai Chemical PE line). These are typical values, not specifications; actual values follow the COA of each lot. Contact us for the full TDS.
02 / FEATURES & APPLICATIONS
Applications of LF511
Key features
- Good heat sealing with strong seals – for bags and film that are sealed a lot.
- Clear (haze below 8%), slippery (friction below 0.2) film with few fish-eyes.
- MFR 3 – a balance of easy flow and strength; suits both film and foam.
Typical end uses
General blown film, thin packaging bags and film that need heat sealing; PE foam such as fruit-protection foam nets, foam sheet and air-bubble foam.
Processing tips
Blow at a melt temperature of about 160–190 °C depending on the line and gauge; blend with LLDPE for extra toughness.
03 / FAQ
FAQ
What is the price of LDPE LF511 Lotte today?
The price of LDPE LF511 Lotte changes with the market and order quantity. Call or message 0968 180 543 on Zalo, or send a quote request for today’s price.
What is LDPE LF511 Lotte used for?
General blown film, thin packaging bags and film that need heat sealing; PE foam such as fruit-protection foam nets, foam sheet and air-bubble foam.
Can LF511 be used for foam?
Yes. Lotte Chemical lists LF511 for both blown film and foam. On a foam line, run a sample trial to tune the blowing agent level and temperatures.
How is LDPE different from LLDPE?
LDPE has long branches, so its film is clear and easy to blow; LLDPE is linear, so its film is tougher and more puncture-resistant. Many converters blend the two to get both.
Can I get the TDS and COA for LF511?
Yes. Ask for the technical data sheet (TDS) and the certificate of analysis (COA) of the specific lot when you request a quote.
Where does My Thinh deliver LDPE LF511 Lotte?
We deliver to your plant. Schedule, location and packaging are confirmed for each order.
Are LF511 and LF-511 the same grade?
Yes. LF-511 is another way of writing LF511 that buyers often use when searching.
