Low-density polyethylene
LDPE LF410 Lotte
Low-density polyethylene · Lotte
LDPE LF410 Lotte is an LDPE made in Korea by HD Hyundai Chemical (a Lotte Chemical – HD Hyundai Oilbank joint venture) using the high-pressure tubular process, and marketed by Lotte Chemical. MFR 2.0 g/10 min, density 0.922, a low level of slip and antiblock and low fish-eyes – giving tougher film than MFR 3–4 grades. Imported and distributed by My Thinh Plastics, with the TDS and COA of each lot. Also searched as: LDPE LF-410, LF-410 Lotte.
01 / SPECIFICATIONS
LDPE LF410 Lotte data
| Property | Typical value |
|---|---|
| MFR (190 °C/2.16 kg) | 2.0 g/10 min |
| Density | 0.922 g/cm³ |
| Additives | Slip, antiblock (low level) |
| Melting point | 110 °C |
| Vicat softening point | 93 °C |
| Haze | < 8 % |
| Dart drop impact (F50) | 90 g |
| Production process | High-pressure tubular |
| Processing method | Blown film, foam |
Per the Lotte Chemical LF410 TDS (Hyundai Chemical PE line). These are typical values, not specifications; actual values follow the COA of each lot. Contact us for the full TDS.
02 / FEATURES & APPLICATIONS
Applications of LF410
Key features
- MFR 2 – higher melt strength than MFR 4 grades, a stable bubble and tougher film.
- Low fish-eyes, clear film (haze below 8%) and good heat sealing.
- A low level of slip and antiblock: film does not block yet stays easy to print and laminate.
Typical end uses
General blown film, shrink film, bags and packaging film that need toughness; PE foam such as fruit-protection foam nets and air-bubble foam.
Processing tips
TDS data are measured on 50 µm film blown at 170 °C with a BUR of 2.5 – a good starting point to adjust for your line. Melt temperature is usually about 160–190 °C; blend with LLDPE for even tougher film.
03 / FAQ
FAQ
What is the price of LDPE LF410 Lotte today?
The price of LDPE LF410 Lotte changes with the market and order quantity. Call or message 0968 180 543 on Zalo, or send a quote request for today’s price.
What is LDPE LF410 Lotte used for?
General blown film, shrink film, bags and packaging film that need toughness; PE foam such as fruit-protection foam nets and air-bubble foam.
How is LF410 different from LF511?
Same plant, same 0.922 density. LF410 has an MFR of 2.0 for tougher film and a firmer bubble – suited to thicker and shrink film. LF511 has an MFR of 3.0, flows more easily, seals well and gives slippery film – suited to thin film and foam.
The LF410 bag says Hyundai Chemical – is it a Lotte product?
Yes. LF410 is made by HD Hyundai Chemical – a joint venture of Lotte Chemical and HD Hyundai Oilbank – and marketed by Lotte Chemical, so the bag carries the Lotte Chemical logo and Hyundai Chemical as producer, made in Korea.
How is LDPE different from LLDPE?
LDPE has long branches, so its film is clear and easy to blow; LLDPE is linear, so its film is tougher and more puncture-resistant. Many converters blend the two to get both.
Can I get the TDS and COA for LF410?
Yes. Ask for the technical data sheet (TDS) and the certificate of analysis (COA) of the specific lot when you request a quote.
Where does My Thinh deliver LDPE LF410 Lotte?
We deliver to your plant. Schedule, location and packaging are confirmed for each order.
Are LF410 and LF-410 the same grade?
Yes. LF-410 is another way of writing LF410 that buyers often use when searching.
