Virgin resin
LDPE
Low-density polyethylene
LDPE (low-density polyethylene) is made by the high-pressure process; its long-chain branching gives soft, clear film that blows easily and seals well. My Thinh distributes film-grade LDPE from LyondellBasell, PTTGC (Thailand), SABIC and Tasnee (Saudi Arabia) and Lotte Chemical (Korea), with melt flow rates from 2 to 4 g/10 min and the TDS and COA of every lot.
6 GRADES
LDPE grades we supply
| Grade | Brand / origin | |
|---|---|---|
| 2427K | Lupolen | Details |
| 2426K | InnoPlus | Details |
| 4025AS | Tasnee | Details |
| HP4023WN | Sabic | Details |
| LF410 | Lotte | Details |
| LF511 | Lotte | Details |
QUICK COMPARISON
Choosing a LDPE grade by application
| Grade | Brand | MFR (g/10 min) | Density (g/cm³) | Additives | Best for |
|---|---|---|---|---|---|
| 2427K | Lupolen | 4.0 | 0.924 | Antioxidant; erucamide slip 600 ppm; silica antiblock 1800 ppm | Food packaging, shrink and hygiene film |
| 2426K | InnoPlus | 4 | 0.924 | Slip, antiblock | Zip bags, shrink film; cap liners and closures |
| 4025AS | Tasnee | 4 | 0.925 | Antiblock, slip | Thin, clear packaging bags and film |
| HP4023WN | Sabic | 4.0 | 0.923 | Slip, antiblock; no antioxidant | Clear bags: zip, laundry and produce bags |
| LF410 | Lotte | 2.0 | 0.922 | Slip, antiblock (low level) | Thicker, tougher film; shrink film; foam |
| LF511 | Lotte | 3.0 | 0.922 | — | Heat-sealed thin film; foam |
Typical values from producer TDS; actual values follow the COA of each lot.
01 / APPLICATIONS
Applications
Zip bags, bread bags, produce bags and clear laundry bags; food and consumer packaging film; shrink and hygiene film; LLDPE blends for carrier and refuse bags; cap liners and closures; PE foam (fruit-protection nets, air-bubble foam).
02 / FAQ
FAQ
What is LDPE resin used for?
Zip bags, bread bags, produce bags and clear laundry bags; food and consumer packaging film; shrink and hygiene film; LLDPE blends for carrier and refuse bags; cap liners and closures; PE foam (fruit-protection nets, air-bubble foam).
Should I choose an LDPE with MFR 2, 3 or 4?
The lower the MFR, the stiffer the melt, the firmer the bubble and the tougher the film – suited to thicker and shrink film (e.g. LF410, MFR 2). MFR 4 flows easily for thin, clear film and fast lines (e.g. 2426K, 2427K, HP4023WN, 4025AS). MFR 3 sits in between (LF511).
When do I need LDPE with slip and antiblock?
When bags must open easily, film must not block and it runs on automatic packing lines. If the film is mainly for printing or multi-layer lamination, slip can reduce ink and adhesive bonding – then choose a low- or no-slip grade and corona-treat before printing.
How is LDPE different from LLDPE?
LDPE has long branches, so its film is clear, easy to blow and the bubble is stable; LLDPE is linear, so its film is tougher with better tensile and puncture strength. Many converters blend the two – often 10–30% LDPE – to get both.
Does My Thinh provide TDS, COA and samples?
Yes. Every grade comes with the producer’s TDS and the COA of the actual lot, and we supply samples for a trial before large orders. Packed in 25 kg bags and delivered to your plant.
