Low-density polyethylene
LDPE 2426K InnoPlus
Low-density polyethylene · InnoPlus
LDPE 2426K InnoPlus is InnoPlus LD2426K LDPE from PTT Global Chemical (GC, Thailand), made by the high-pressure tubular process licensed from LyondellBasell. It contains slip and antiblock, with an MFR of 4 g/10 min and a density of 0.924, and balances clarity, mechanical strength and processability. Imported and distributed by My Thinh Plastics, with the TDS and COA of each lot.
01 / SPECIFICATIONS
LDPE 2426K InnoPlus data
| Property | Typical value |
|---|---|
| MFR (190 °C/2.16 kg) | 4 g/10 min |
| Density | 0.924 g/cm³ |
| Additives | Slip, antiblock |
| Production process | High-pressure tubular (LyondellBasell licence) |
| Processing method | Blown film; injection-moulded cap liners and caps |
Per PTT Global Chemical InnoPlus LD2426K literature. These are typical values, not specifications; actual values follow the COA of each lot. Contact us for the full TDS.
02 / FEATURES & APPLICATIONS
Applications of 2426K
Key features
- Clear, glossy, low-friction film thanks to slip and antiblock – bags do not block and open easily.
- MFR 4 flows well for thin, even film and fast line speeds.
- Besides film it is used for cap liners, drinking-water caps and cooking-oil caps.
Typical end uses
Zip bags, shrink film, food and consumer packaging film and general thin film; cap liners, drinking-water caps and cooking-oil caps.
Processing tips
Blow at a melt temperature of about 160–190 °C depending on the line and gauge; blend with LLDPE for extra toughness.
03 / FAQ
FAQ
What is the price of LDPE 2426K InnoPlus today?
The price of LDPE 2426K InnoPlus changes with the market and order quantity. Call or message 0968 180 543 on Zalo, or send a quote request for today’s price.
What is LDPE 2426K InnoPlus used for?
Zip bags, shrink film, food and consumer packaging film and general thin film; cap liners, drinking-water caps and cooking-oil caps.
Can 2426K be injection moulded into caps?
Yes. Besides film, GC recommends LD2426K for cap liners, drinking-water caps and cooking-oil caps – parts that need softness, a good seal and a slippery surface.
How is LDPE different from LLDPE?
LDPE has long branches, so its film is clear and easy to blow; LLDPE is linear, so its film is tougher and more puncture-resistant. Many converters blend the two to get both.
Can I get the TDS and COA for 2426K?
Yes. Ask for the technical data sheet (TDS) and the certificate of analysis (COA) of the specific lot when you request a quote.
Where does My Thinh deliver LDPE 2426K InnoPlus?
We deliver to your plant. Schedule, location and packaging are confirmed for each order.
