Linear low-density polyethylene
LLDPE FD21HS Qamar
Linear low-density polyethylene · Qamar
LLDPE FD21HS Qamar is QAMAR FD21HS LLDPE marketed by SPDC (Japan) and made at Sharq – Eastern Petrochemical Company in Jubail, Saudi Arabia, a 50/50 joint venture of SABIC and SPDC. MFR 2.0 g/10 min, density 0.918, with slip and antiblock, clear film (haze about 12%), for both blown and cast film. Imported and distributed by My Thinh Plastics, with the TDS and COA of each lot. Also searched as: LLDPE FD-21HS, FD-21HS Qamar.
01 / SPECIFICATIONS
LLDPE FD21HS Qamar data
| Property | Typical value |
|---|---|
| MFR (190 °C/2.16 kg) | 2.0 g/10 min |
| Density | 0.918 g/cm³ |
| Additives | Slip, antiblock |
| Tensile strength at yield | 12 MPa |
| Dart drop impact (F50) | 110 g (30 µm) |
| Haze | 12 % (30 µm) |
| Vicat softening point | 100 °C |
| Melting point | 122 °C |
| Recommended melt temperature | 170–190 °C |
| Blow-up ratio (BUR) | 2–4 |
| Processing method | Blown film, cast film |
Per the QAMAR FD21HS datasheet (SPDC). These are typical values, not specifications; actual values follow the COA of each lot. Contact us for the full TDS.
02 / FEATURES & APPLICATIONS
Applications of FD21HS
Key features
- Clear film (haze about 12%) with a glossy surface – for packaging that shows the product.
- Slip and antiblock: no blocking and easy-opening bags.
- Tough, with 600–900% elongation at break and good low-temperature performance (brittleness below −70 °C).
Typical end uses
Packaging film needing clarity, consumer bags, liners, protective and cover film; cast film and LDPE blends.
Processing tips
Melt temperature 170–190 °C (aim about 180 °C), BUR 2–4, die gap 2.0–3.0 mm, an LLDPE screw and a single- or dual-lip air ring.
03 / FAQ
FAQ
What is the price of LLDPE FD21HS Qamar today?
The price of LLDPE FD21HS Qamar changes with the market and order quantity. Call or message 0968 180 543 on Zalo, or send a quote request for today’s price. You can follow the LLDPE futures trend on the Dalian exchange on our Market page.
What is LLDPE FD21HS Qamar used for?
Packaging film needing clarity, consumer bags, liners, protective and cover film; cast film and LDPE blends.
Is FD21HS a Qamar or a SABIC grade?
The FD21HS bag is labelled QAMAR – SPDC Ltd. and made by Eastern Petrochemical Company (Sharq) in Saudi Arabia. Sharq is a 50/50 SABIC–SPDC joint venture, but FD21HS carries the Qamar label sold by SPDC, so we list it as Qamar.
What is the difference between C4 and C6 LLDPE?
C4 uses butene and is economical and easy to run; C6 (hexene) and C8 (octene) give tougher, more tear-resistant film. Choose by the strength your product needs.
Can I get the TDS and COA for FD21HS?
Yes. Ask for the technical data sheet (TDS) and the certificate of analysis (COA) of the specific lot when you request a quote.
Where does My Thinh deliver LLDPE FD21HS Qamar?
We deliver to your plant. Schedule, location and packaging are confirmed for each order.
Are FD21HS and FD-21HS the same grade?
Yes. FD-21HS is another way of writing FD21HS that buyers often use when searching.
