Start from the finished product
Choosing a material should start from the production process and the requirements of the finished product: stiffness, softness, clarity, impact resistance, service temperature and, where relevant, food-contact requirements. The resin family is only the first step; the grade determines many processing properties.
PP — stiffness and a wide choice of grades
PP is used in woven bags, injection moulding and many household products. Homopolymer and copolymer grades differ in stiffness and impact resistance. Check the melt flow index against your actual process and equipment.
PE — several families for different needs
LDPE and LLDPE are usually considered for packaging film and blending. HDPE is used for blow-moulded bottles, jerrycans and pipe extrusion. Not every HDPE grade is suitable for pipe; technical applications need a grade confirmed against the required standard.
PVC — the resin and its additive system
PVC powder should be considered together with its K-value, stabiliser, plasticizer and other formulation components. Requirements for rigid and flexible PVC differ considerably.
Preparing to talk to a supplier
Share your application, process, the grade you currently use, the properties you need and the expected volume. Ask for the TDS and COA of the grade, and run a trial on your line before changing materials. This article is general guidance and does not replace technical confirmation for a specific grade.

